Mert BulutProduct Development,Sourcing,Electronics,China
Bio

Hello everyone, I've 16 yrs experience in hardware products, and I'm the founder of Mezz Solutions, based in Shenzhen, China.
.
I help companies, startups, makers, and online sellers to design, develop, test, certify, manufacture, and source products. I can provide a complete supply chain solution for your business.
.
I have expertise, especially in consumer electronics and audio products. And besides, mobile accessories, home appliances, smart home, pet, kitchen appliances, IT, outdoor, machinery, ceramic sanitaryware, and other consumer products.
.
Why give me a call?
I listen and will try to answer efficiently.
And more importantly, I've a huge passion for this business, I'm eager to share.
.
What I can offer:

- A quick, actionable guide through the whole design, development, prototyping, and manufacturing stages for your electronic product.
.
- Guidance for the problems with your product; design, development, and testing stages.
.
- Clarity for your product testing and certification-related questions.
.
- Solutions to your problems related to your supplier; communication, negotiation, project management, and quality control, contract issues.
.
- Knowledge of how to find and source your product, with the right quality and price.
.
- The methods on how to find the right supplier and how to qualify your supply chain.


Recent Answers


There are a lot challenges during developing and manufacturing products. But also it is a lot of fun.

I assume you want to produce a physical product. What is the sales market? What are the use cases of this product? You need to evaluate all the things before starting the design. Choosing the materials, determining the functions, all need to be carefully thought in advance. If you are not sure about what to do, you can consult some expert in that industry. You can consult to design houses, consultants, or factories even.

I have developed hundreds of products my entire career. If you have any questions, I am happy to help.


To directly answer your question, different products have different requirements and are subject to different regulations. And each product and product category should be evaluated individually.

You can check the government link for some related info.
https://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00051.html#Q1

You can check the lab which issued the certification if they are authorized to issue Canadian certificate. You can also call the lab and make due diligence regarding the report. There are many other ways to verify the factory too.

I have been developing products for 15+ years and living in China for the last 10 years. I am happy to help with your further questions.

Cheers,
Mert.


As you are developing the gym bag, I assume you already have the expertise on the material selection, design elements, quality expectation.

For manufacturer selection, 3 things are important.
1- Quality. How do they control their quality in mass production? What is their general approach? To save the day or continuously improvement?
2- Pricing as usual.
3- If they are really know what they are doing? Are they only manufacturing products or also designing/developing? For how long are they doing the business and how capable are they? This will help you to speed up your project, they can help you to solve the problems from the beginning. In design stage, prototype, manufacturing. They will also help with material selection as they have long time experience.

Let me know if you have any further questions. I am happy to help.


First of all, you should have agreed on the minimum order quantity (MOQ) in the very beginning of the project. No matter what the product is, 100.000 for MOQ is too much and not reasonable.
1- Find alternative factories who can accept lower quantity and try to get even lower price than your original factory.
2- After you found the alternative (you don't need to validate samples yet, don't lose time), use this info on your current factory to leverage. Tell honestly that if your factory cannot support you on the quantity, you will move to the other factory.
3- If your factory is really caring about your business, he will listen to you.
4- If not, just approve the samples from the other factory and move on. Don't get into any financial trouble because of this factory. They are not the only factory producing this product in whole China.
Hope this info helps and let me know if I can support you further. I am in Shenzhen for 8 years and very familiar with the environment here.

Best Regards,
Mert


I have been in the electronics industry for 12+ years and 8 years in China directly handling the supply chain. I gained great expertise for each step from A to Z during product design, testing and supply chain control Even the good factories may face quality issues if you don't treat well. You can start taking actions with below questions.
1- What are the return reasons? Design related, transportation or manufacturing related? Classifying the defects from the field will help you to analyze the problem faster. Assuming here the problem is related to your manufacturer so
2- If the outgoing inspection is done by the manufacturer only, you need to add a 3rd party inspection control before shipment. If you don't have your inspection team, you can find a professional 3rd party inspection service.
3- You need to increase the inspection standard and make it tighter. I believe BS6001 standard, sampling level 2, AQL Critical: 0, Major: 0.4, Minor: 1.5 can work for you. Applying these 3 parts will help you to minimize the defected products in the field. But this is not enough. You need to solve the problem from the beginning that it won't happen again
4- For each defected unit ask an 8D report from the factory. Push them to dive into the root cause of the problems in their facility.
5- Using a professional 3rd party service apply a process audit to the factory. You need to understand where are the risky parts not only in in their manufacturing line but also in their overall operation.
6- If you are seeing any material problems, dive into the their Incoming Quality Control department. Any defected material released from IQC to the production line is a bomb waiting for exploding. You need to make sure that IQC is doing their job properly. If needed you can ask them to increase their incoming quality inspection standards. Don't forget that the more problems you fix in the early stage and fix, you will have a more reliable product and you will be more relaxed afterwards.
7- If the factory is receiving any defected materials from their own suppliers, then you may need to apply even a sub-supplier audit. All these actions can be taken easily if your factory is cooperative. If not,
8- Change your supplier and work with a more responsible factory.
These 8 items would be my main and basic control check points. If you have any questions, I more than happy to help.


It is difficult to make risk-free shipments for the battery of the products. But you can minimize the risk. The most effective way is to start working with a reliable battery cell in your product. This will solve most of your problems.
Moreover, pay attention to work with a factory which has enough equipment to test batteries. Not only outlook and function check but also a comprehensive life cycle and safety test with a strict AQL. Make sure that their incoming quality control team is doing the process regularly for each lot. Ask your factory to provide these IQC reports to you. If you have a chance, go and check in person, or do it via a 3rd party company.
Besides this, in the outgoing inspection process, you can repeat these life cycle and safety tests based on an agreed sampling qty. This will help you to verify that the IQC of the factory is doing their job.
Another suggestion, please make sure that your batteries have date codes on it and do not let your factory to use more than 3 months old battery. Considering the production and transportation time, when your customer receives the products, your battery will be probably 6 months old already. Usually the brands give 6 months guarantee to the end customer to replace their batteries which in total accumulates to 1 year from the production of the battery to the customers' 6 months usage time. This is usually the warranty that the battery suppliers.
There are also proven design requirements for the batteries. If needed, I would like to help with further information.

Regards,
Mert.


Contact on Clarity

$ 5.00/ min

5.00 Rating
Schedule a Call

Send Message

Stats

6

Answers

12

Calls


Access Startup Experts

Connect with over 20,000 Startup Experts to answer your questions.

Learn More

Copyright © 2024 Startups.com LLC. All rights reserved.